(0)
DTE-AUD2CH-XLR-EN
SGD 195.00
AVAILABILITY: IN STOCK
Dante 2CH XLR Input Adapter with PoE
Description
This Dante® 2CH XLR Input Adapter is an audio transmitter based on the Dante® Ultimo 2×2 solution. It converts two-channel balanced/unbalanced XLR analog audio into Dante® 2CH digital audio, then transmits the audio to the receiving end through network (Dante®). Analog audio input supports 5-level sensitivity adjustment.
The adapter supports local USB-C port power supply and PoE function.
Features:
☆ Two-channel XLR analog audio to Dante® 2CH digital audio
☆ Balanced/unbalanced XLR analog audio input
☆ Dante® audio sampling rate supports 44.1/48/88.2/96KHz@24bit
☆ Dante® audio delay supports 1/2/5ms (configurable)
☆ Analog audio input supports 5-level sensitivity adjustment (+24dBu, +4dBu, 0dBu, 0dBv, -10dBv)
☆ Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE)
☆ Compact design for easy and flexible installation
Additional information
| Weight | 0.4 kg |
|---|---|
| Dimensions | 20 × 20 × 10 cm |
Specification
| Technical | ||
| Input | Two-channel balanced/unbalanced XLR analog audio | |
| Output | Dante® 2CH digital audio | |
| Control Method | Dante® Controller | |
| Video Network Bandwidth | 100M | |
| Configurable Dante® device latency | ||
| Audio Latency | (Supports 1, 2 or 5ms configurable using Dante® Controller) | |
| XLR IN [Analog audio input, Balanced/unbalanced 2CH, Max input level +24dBu] | ||
| Audio Formats | DANTE OUT [Digital audio output, PCM 2CH 44.1K-96KHz 16/24bit] | |
| XLR Analog Audio In | ||
| Input Impedance | 20k Ohm balanced 10k Ohm unbalanced | |
| Line Input Level (Maximum) | +24dBu (12.28Vrms) @balanced audio | |
| +18dBu (6.15Vrms) @unbalanced audio | ||
| Audio Parameters | Frequency Response | 20Hz to 20kHz (-/+0.5dB) |
| Dynamic Range | >100dB@0dBu, 1kHzA-weighted | |
| Audio S/N Ratio | >100dB@0dBu, 1kHzA-weighted | |
| Audio THD+N | < 0.01% at +4dBu, 1KHz | |
| Audio Output Sync Delay | <10ms | |
| Transmission Distance | 328ft/100m (CAT6/6A/7) | |
| ESD Protection | IEC 61000-4-2: ±8kV (Air-gap discharge) & | |
| ±4kV (Contact discharge) | ||
| Connection | ||
| 2x CH1/CH2 XLR IN [XLR female plug, with 30cm cable] 1x POWER [USB-C power and firmware update port, | ||
| Input port | 12-pin female] | |
| Output port | 1x DANTE [RJ45 connector, PoE] | |
| Others | 1x RESET button [System reboot button] 2x SENSITIVITY knob [5-level dip switch] | |
| Mechanical | ||
| Housing | Plastic Enclosure | |
| Color | Black | |
| Dimensions | 115mm [W] x 40mm [D] x 28 mm [H] | |
| Weight | 173g | |
| Power Supply | USB input: 5V/500mA | |
| PoE input: PoE IEEE802.3af Class 0 | ||
| Power Consumption | 2W (Max) | |
| Operating Temperature | 32 ~ 104°F / 0 ~ 40°C | |
| Storage Temperature | -4 ~ 140°F / -20 ~ 60°C | |
| Operating | 20% ~ 80% RH (relative humidity, non-condensing) | |
| Humidity | ||
| Storage Humidity | 10% ~ 90% RH (relative humidity, non-condensing) | |
Application Drawing
Reviews
There are no reviews yet.