ATZ EQ-HDMI-CABLE-V2.0-xxM

SGD 160.00SGD 198.00


HDMI TO HDMI CABLE Ver 2.0 W/GOLD PLATED CONN – ACTIVE w/EQUALIZER
(20M/25M/30M/35M)

Clear

Quantity:

Description

This cable is suitable for HDTV, home theater, DVD player, projector, PS3, XBOX 360 and other HDMI devices.

Features:

  • 4K Ultra HD @50/60Hz – i.e. 2160p@50Hz and 2160p@60Hz – four times the clarity of 1080p@60Hz
  • Transfer speed: 18Gbps
  • 3D support for immersive movies and gaming
  • Support for Deep Color and the latest color spaces such as BT.2020
  • Ethernet connectivity, allowing connected devices to share an Internet connection.
  • Up to 32bit uncompressed digital audio channels
  • Up to 1536kHz audio sampling
  • Simultaneous delivery of dual video streams to multiple users (on the same screen)
  • Simultaneous delivery of multi-stream audio to multiple users (up to four)
  • Support HDR (High Dynamic range)
  • Support ARC
  • Support CEC extensions provide more expanded command and control of consumer electronics devices through a single control point
  • High density triple shielding for maximum rejection of EMI and RFI
  • Connectors: 24K gold-plated to ensure superior signal transfer and lifetime of maximum performance
  • Built-in Equalizer (Booster)
    The built-in equalizer on this cable is used to regenerate and re-establish proper timings of the TMDC and DDC signals. This helps boost the HDMI signal allowing it to be reliably transferred over longer distances. No external power is required for the equalizer-it is driven by the internal 5VDC signal carried over the HDMI cable.
  • Shielding at Connector: Copper Foil wrapped 360˚ around Connector housing and Soldered 360˚ – provides efficient shielding from electromagnetic interference (EMI, RFI)
  • Welded Reinforced Ring Cover: for stronger protection against breakage at connection point after prolonged stress bearing of cable weight.
  • Friction-Locking: connectors constructed with raised tabs to ensure tighter fit
  • Ferrite core: This cable uses ferrite cores which are small magnetic blocks wrapped around the end of the cable to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them as very low-level heat.

* Remarks: This is a uni-directional cable. Please ensure correct connection with connector ends labelled with “Input–>” to source and “Output–>” to display.
The cable will not be damaged, nor will it cause the connected devices to be damaged, due to wrong connection.

Additional information

Weight N/A
Dimensions N/A

Specification

Conductors High purity Oxygen Free Bare Copper
Insulation foamed PE insulation, ensure image quality and transmit image signal with stability.
Inner shield 100% Aluminum/Mylar foil shield, prevent high frequency noises and interference
Outer shield 95% AL+MG braid shield, prevents most low frequency noises and interference.
Contacts 24K Gold Plated
Connectors Zn or Al alloy Metal shell type
Available lengths V2.0 up to 50m, V1.4 up to 100m
Available terminations HDMI,19PIN,Male to Male, Version 1.4 and V2.0 available
Available gauge 26/28AWG OD:8.0mm
Certification RoHS, UL, CE
Shielding AL+ Mg+ Braiding+ Ferrite(for option)
AWG 24/26/28 AWG available for different length

ELECTRICAL:

Quality Control operation according to regulations & rules in ISO9001:2008
Voltage DC300V 5M ohm/10ms
Insulation Resistance 10M min
Contact Resistance 5 ohm max
Working Temperature -25°C – 80°C
Data transfer rate 18Gbps Max.
Differential Impedance 100±10Ω(TDR)