ATZ HDMI-E120CL is a cost-effective point-to-point extender set for HDMI V1.4 and IR signals. The extender supports 4K@30Hz with 4:4:4 Chroma sampling along with HDMI data rates up to 10.2Gbps and HDCP 1.4 compliant. It provides HDMI transmission up to 120 meters for 4K@30Hz 4:4:4 or 1080p, over single CAT5e/6 cable. The extender supports video resolution down-scaling allowing the 4K input to be automatically downscale to 1080p output for compatibility with 1080p display.
Features:
- Supports HDMI V1.4, up to 4K@30Hz 4:4:4, HDCP 1.4.
- Extends 4K or 1080p HDMI signal up to 393 feet (120m) over a single CAT5e/6 cable.
- HDMI loop out on transmitter.
- Bi-directional IR pass-through.
- Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device.
- Features visually lossless compression with no latency.
- Smart EDID management.
- Compact design, easy to install and simple to operate.
Specification
| Transmitter |
| Input |
(1) SOURCE (19-pin type-A female HDMI) |
| Output |
(1) DISPLAY (19-pin type-A female HDMI) |
| (1) CATx OUT (RJ45) |
| Control |
(1) IR IN (3.5mm mini jack) |
| (1) IR OUT (3.5mm mini jack) |
| Receiver |
| Input |
(1) CATx IN (RJ45) |
| Output |
(1) DISPLAY (19-pin type-A female HDMI) |
| Control |
(1) IR IN (3.5mm mini jack) |
| (1) IR OUT (3.5mm mini jack) |
| General |
| Video Resolution |
Up to 4K@60Hz 4:4:4 |
| HDMI Audio Format |
Supports LPCM 2ch, LPCM 5.1ch, LPCM 7.1ch, Dolby Digital 2ch, Dolby Digital 5.1ch, DTS 2ch, DTS 5.1ch, DTS 96/24 5.1ch |
| Transmission Distance |
4K/1080p ≤ 120 meters (393ft) [CAT6a/(F/FTP)] |
| HDMI Version |
Up to 2.0 |
| HDCP Version |
Up to 2.3. The HDCP of output follows the HDCP version of display device. |
| EDID Management |
Supported. |
| Power Supply Input: |
Input: 100 to 240V AC, 50/60Hz; Output: 12V DC 1A |
| Power Consumption |
4W (Max) |
| Operation Temperature |
-5 to +55℃ (+23° to +131°F) |
| Storage Temperature |
-25 to +70℃ (-13° to +158°F) |
| Relative Humidity |
10% to 90%, Non-condensing |
| Dimensions (W*H*D) |
80mm x 16.8mm x 80mm |
| Net Weight |
TX: 65g, RX: 60g |
Note: The extender set does not support HBR audio.
